|
DashTrak™ Windows® 98 SE Driver Installation
In order to use Windows 98 SE (second edition) to access your
DashTrak™ Wellness Subscription and upload your walking data, you will need to
install the DashTrak Windows 98 SE USB driver. Follow the steps
below to download and install this driver.
NOTE: We recommend that you read through the following
steps before beginning and print this page for reference during
the installation process. If you need further assistance or have any
questions, please contact our customer
support department.
-
Click here to run the
installation package. When prompted to open or save, click Open.
-
The WinZip Self-Extractor will launch as shown in the figure below.

-
Click Unzip . The driver files are copied to
c:\walkstyles.

Click OK on the popup message, and click Close
on the Self-Extractor program window.
-
Next, attach the DashTrak USB cable to your PC. DO NOT
connect the cable to your DashTrak yet.
-
On the DashTrak, press the Menu button once to bring your
DashTrak to the SAFE TO CONNECT screen:

-
Now plug the other end of the USB cable into the DashTrak.
-
Your PC will detect the device and launch the Add New Hardware
Wizard. Click Next.

-
Select the "Search for the best driver for your device" option, and
then click Next.

-
To locate the driver, check the "Specify a location" option and uncheck
any other checked options. Enter "C:\WalkStyles" into the text box.
Then click Next.

-
Windows will find the driver in the specified location and prepare for
installation. Click Next.

-
Windows completes the driver installation. Click Finish.

-
Two additional popup windows may appear briefly as the installation completes.
-
Your DashTrak driver is now installed and your DashTrak is ready for use.
-
Return to the DashTrak
Connection Guide and resume setting up your DashTrak and subscription.
|